Benderlink for Supravision
ATTWiki Products Utility Software Document Library Online Store Contact Us

Advanced Tubular Technologies, Inc.




Benderlink for Supravision uses the legacy Supravision protocol . This Benderlink will allow ROMER arms running the Windows version of Supravision (Version 5) to communicate quickly with older machines that still use the older RS-232 Supravision communications protocol.


More about the Supravision Protocol

    The original Supravision protocol was developed before the advent of Windows when DOS computers were handling all RS-232 communications. Many of these older protocols depend on the fast switching of the control-lines in RS-232 ports - and this is true of the legacy Supravision protocol. When introduced, Windows took over the management of the RS-232 port - but many times slower than the equivalent DOS-based computers.

    This created a timing problem for users of Supravision protocol when switching to Windows. Our new Benderlink for Supravision software is designed to communicate in a way that overcomes these Windows speed issues.

    If you are using the Supravision protocol on measuring centers that use the DOS-based Supravision and wish to upgrade to the Windows-based Supravision, then please contact us for more information about this product.

System Features

TRANSLATES SUPRAVISION DATA

Connects directly to the Supravision-based measuring centers in order to speed communications with benders that use the older Supravision RS-232 protocol.

FAST BI-DIRECTIONAL COMMUNICATIONS

When this Benderlink manages Supravision/Supravision protocol communications, each bi-directional transmission improves transmission times from more then 3 minutes down to less than 15 seconds. That's 12 times faster!

RECALL DATA FROM THE BENDER

Recall any part by part number from the bender into the measuring center.

 

SEND DATA TO THE BENDER

Transmit parts to the bender for part setup.

 

ENABLES CORRECTIONS LOOPS

Translates corrections data between tube measuring centers and the bender. This feature allows the measuring center to make direct corrections to the bender data to adjust the machine automatically.

PROVIDES CLEAR COMMUNICATION STATUS FEEDBACK

The Benderlink user-interface displays the status of communications. The program provides feedback for the type of measuring center being used, the status of communications, and translation status.

EASY USER SETUP

Benderlink provides a single-menu setup display for easy access to Benderlink configuration.








System Requirements


Software License Prices

  US License of Benderlink for Adaptive Motion Software
  International License of Benderlink for Adaptive Motion Software
** Please contact us for a quotation**
  *The higher license prices for International sales take into account extra costs incurred in handling cross-border sales. Also terms of sale may vary from our standard US terms.

Benderlink for Adaptive Motion is software owned and developed solely by Advanced Tubular Technologies, Inc.

 

Please contact: Advanced Tubular Technologies
14515 Mackey Road
Suite 202
Holly, MI 48442

Telephone: (248) 674-2059
Facsimile: (248) 724-0807

Send e-mail directly to:
Advanced Tubular Technologies
.




Click here to return to the home page.

Please contact Advanced Tubular Technologies if you have further questions about Benderlink for SV software.


Copyright © , Advanced Tubular Technologies